微機控制電子萬能試驗機主要用于對各種各樣非金屬材料及高分子材料開展基本物理性能指標值的檢測。相關工作人員進行安裝的自動控制系統和數據管理系統，保持了系統軟件的全智能化調節。驗全過程中統計數據的收集、全過程的操縱和實驗統計數據的后處理工藝工作中所有由電子計算機來進行。

Microcomputer controlled electronic universal testing machine is mainly used to test the basic physical properties of various non-metallic materials and polymer materials. Relevant staff install automatic control system and data management system to maintain the full intelligent adjustment of system software. The collection of statistical data, the operation of the whole process and the post-processing of experimental statistical data are all carried out by computer.

本機器設備可以全自動求得抗壓強度、抗張強度、撕破抗壓強度等。該機器設備適用防水材料、金屬材料銅絲線、紡織品、硫化橡膠、瓷器、包裝制造行業、塑料薄膜、紙型、塑膠制品等加工業及其各個產品品質監管單位，一起還適用大中專院校開展課堂教學演試工作中。

The machine and equipment can automatically obtain compressive strength, tensile strength, tear compressive strength and so on. This machine is suitable for waterproof materials, metal materials, copper wire, textiles, vulcanized rubber, porcelain, packaging and manufacturing industries, plastic film, paper, plastic products, and other processing industries, as well as the quality control units of their products. It is also suitable for colleges and universities to carry out classroom teaching auditions.

操作規程

Operating procedures

啟動檢驗，設備運行是不是一切正常。

Start-up inspection, equipment operation is not all normal.

依據檢驗規定拆換適合工裝夾具。

Remove fixtures suitable for tooling according to inspection regulations.

實驗前，調節好限位開關檔塊。

Before the experiment, adjust the limit switch block.

打開服務器上電源總開關，打開計算機測試工具。

Turn on the main power switch on the server and turn on the computer test tool.

設置參數，點擊軟件啟動按鈕，啟動主機開始試驗。

Set parameters, click the software start button, start the host to start the test.

試驗結束，檢查設備運轉是否正常，退出程序，關閉計算機。

At the end of the test, check whether the equipment is running properly, quit the program and shut down the computer.

文章來源：http://www.bingnian.cn/